ParaBody 661101 manual Spring PIN Adjustment

Page 13

3/8” X 1” BUTTON

HEAD CAP SCREW

REAR SHROUD

3/8” X 1” BUTTON

HEAD CAP SCREW

SPRING PIN ADJUSTMENT

FIGURE 14

STEP 14

SECURELY attach the four previously removed 3/8 X 1” BUTTON HEAD CAP SCREWS to the rear SHROUD. See FIGURE 14.

The 100 LEG PRESS is equipped with a spring pin adjustment to accommodate different sized users and allow easy entry and exit from the machine. To use, you must slightly push against the foot plates to take tension off the pin.

Thank you for purchasing the Parabody 661101 Leg Press Adapter Kit. If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714.

13

Image 13
Contents LEG Press Adapter KIT Important Notes Parts List Step Hexnut Base Washer Second Stack With Legpress Base Detail TOP Boom Spring PIN Adjustment