ParaBody 661101 manual Second Stack

	14 3/8 X 2-1/4”
BASE
	3/8” WASHER
3/8” WASHER
6	4-1/2” PULLEY
	2-7/8” L-BRACKET
FIGURE 6	9 HEX NUT
	3/8” LOCK NUT

STEP 6

•SECURELY assemble the previously removed 4-1/2” PULLEY to the BASE using one 3/8 X 2-1/4” BOLT (14), two previously removed 3/8” WASHERS, one previously removed 2-7/8” L-BRACKET, one SWIVEL SNAP (6), one 3/8” HEX NUT (9), and one previously removed 3/8” LOCK NUT. See FIGURE 6.

		TOP BOOM
FIGURE 7A		9 3/8” HEX NUT
(WITHOUT 663101
SECOND STACK	3/8” WASHER
OPTION)	5	3/8” LOCK NUT

STEP 7A

•If the 663101 SECOND STACK OPTION is installed follow STEP 7B .

•Remove one 3/8” WASHER and one 3/8” LOCK NUT from the 3/8” THREADED SHAFT on the TOP BOOM.

•SECURELY assemble one 2” PULLEY (5) to the 3/8” THREADED SHAFT on the TOP BOOM using one previously installed 3/8” WASHER, one 3/8” HEX NUT (9) and one previously installed 3/8” LOCK NUT as shown in FIGURE 7A.

7