FIGURE 9
1/2 X 3"(~~
3/8 X 3"~
STEP 9:
¯Swing the GUIDERODS(9) under the TOPBOOM(2) as shownon FIGURE
¯Assemble the TOPBOOM(2) over the GUIDERODS(9) and SECURELYassemble the TOPBOOM(2) to the UPRIGHT using two 1/2 X 3" BOLTS(28), two 1/2" WASHERS(29), and one 1/2" LOCKNUT(30). See FIGURE
¯SECURELYassemble the TOPBOOM(2) to the top of the POWERRACKusing two 3/8 X 3" BOLTS(26), four 3/8" WASH- ERS(31), and two 3/8" LOCKNUTS(32). See FIGURE
¯Screw the threaded end of the LATCABLE(15) approximately3/4" into the end of the WEIGHTSTACKSHAFT(13) and tighten jamnutsecurely. See FIGURE9.