STEP6:Securely assemble RIGHT(9) & I.EFT
(10)LEG EXT HANDLES to LEG FRAME(11) using two 3/8 X 4" BOLTS
(21), four 3/8" FLATWASHERS,and two
3/8" LOW HEIGHT NYLOCK NUTS (27). See FIGURE
STEP7:Insert two 3 X 2" ENDCAPS(29) into the leg fi:ame as shownin FIGURE5.
FIGURE 6
STEP8:Securely assemble one 1/2" SPRINGPIN AS-
SEMBLY(18) into the spring pin barrel on the
LEGFRAME(11) as shown in FIGURE
FIGURE 7 ~
STEP9:Insert four 2 X 1" ENDCAPS(30) into the ends of the BACKPAD ADJUSTTUBE(2) & BACK PADSUPPORTTUBE(3). See FIGURE