ParaBody 829102 specs

STEP16: Attach eight 1-1/2" X 3/4" GLIDES(33) to ROLI.ERPADADJUSTER(4) and attach eight

1-1/2" X 3/4" GLIDES(33) to 13-1/2" ROLLER PADADJUSTER(5) as shown in FIGURE14.

FIGURE

STEP17: Securely assemble two 3/8" SPRINGPIN AS- SEMBLIES(17) into the spring pin barrels the LEGCURL/EXTENSION(6) as shown FIGURE15.

FIGURE 15

STEP18: Insert 5" & 13-1/2" ROLLERPAD ~r3~I~TI~,RS(4 &5) in the ends of the LEGCURL/EXTENSION(6). Pull back on SPRING PINS until ROLLERPAD ADJUSTERS(4 & 5) lock in place. See FIGURE16.

STEP19: Insert three 2" SQUAREENDCAPS(28) into the ends of the LEGCURL/EXTEN- SION(6). See FIGURE16.

FIGURE 16