3/8 X 3” 10
FIGURE 5 
14
14
12
23
20
3
5
STEP 5:
•Insert two 2” SQ. END CAPS (23) into the ends of the HIP PAD SUPPORT (3) as shown in FIGURE 5.
•SECURELY assemble the HIP PAD SUPPORT (3) to the FRONT UPRIGHT (5) using two 3/8” X 3” BOLTS (10), four 3/8” WASHERS (14), and two 3/8” LOCK NUTS (12). See FIGURE 5.
•Slide two 1 X 8” GRIPS (20) onto the HIP PAD SUPPORT (3). (Using water will help slide them on.)
7 |
|
3 |
|
14 |
|
13 |
|
9 | 3/8 X 1” |
FIGURE 6 |
|
STEP 6:
•SECURELY assemble the PADS (7) to the HIP PAD SUPPORT (3) using two 3/8” X 1” BOLTS (9), four 3/8” WASHERS (14), four 3/8” LOCK WASHERS (13). See FIGURE 6.
THIS CONCLUDES THE ASSEMBLY OF THE 821 HYPEREXTENSION ROMAN CHAIR
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
|
| 1/2 |
0 | 1 | 2 | 3 | 4 | 5 | 6 | ||||||
8