ParaBody 832102 manual Step

3/8” LOW HEIGHT 20

11

29

7

17

16

3/8 X 4-1/2” 26

14

FIGURE 3

STEP 3:

•SECURELY assemble one 3-1/2” PULLEY (11), two 2” WHEELS (16), two 3/8” FLAT WASHERS (17), and two 3/8 ID X 3/8” SPACERS (29) to the ADJUSTMENT TUBE (7) using one 3/8 X 4-1/2” BOLT (26) and one LOW HEIGHT LOCK NUT (20)

as shown in FIGURE 3.

•Attach four PARAGLIDE STRIPS (14) to the outside of the ADJUSTMENT TUBE (7) using the following steps:

•Thoroughly clean all surfaces where the PARAGLIDE STRIPS (14) are to be attached.

•Remove the PARAGLIDE STRIPS (14) from the paper backing and firmly apply them to all shown surfaces.

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5		6

6