ParaBody 848101 manual Step

13 12

4

16

FIGURE 3

STEP 3:

•Insert two 2” SQ. END CAPS (13) into the ends of the CROSS BRACE (4) as shown in FIGURE 3.

•Assemble two 2-1/2 X 5-1/2” NON-SKID STRIPS (12) to the CROSS BRACE (4) as shown in FIGURE 3.

•Assemble one 17-1/2” FOAM STRIP (16) to the underside of the CROSS BRACE (4) as shown in FIGURE 3.

5

18

17

FIGURE 4

STEP 4:

•Attach eight 1 X 1” GLIDES (18) to the ends the CARRIAGE (5) as shown in FIGURE 4 using the following steps:

•Thoroughly clean all surfaces where the 1 X 1” GLIDES (18) are to be attached.

•Remove the 1 X 1” GLIDES (18) from the paper backing and firmly apply them to all shown surfaces.

•SECURELY attach one 1-1/4” SQ. RUBBER BUMPER (17) to the CARRIAGE (5) as shown in FIGURE 4.

5