FIGURE 3
STEP 3
¯Insert four 2" SQ. ENDCAPS(13) into the ends of the UPRIGHTS(1) as shown in FIGURE
¯Slide one BARSUPPORT(4) and one SAFETYRAIL(3) (iN THATORDER)onto each UPRIGHT(1). Pull back SPRINGPIN ASSEMBLIESuntil they pop into holes.
5
FIGURE 3
¯Insert four 2" SQ. ENDCAPS(13) into the ends of the UPRIGHTS(1) as shown in FIGURE
¯Slide one BARSUPPORT(4) and one SAFETYRAIL(3) (iN THATORDER)onto each UPRIGHT(1). Pull back SPRINGPIN ASSEMBLIESuntil they pop into holes.
5