FIGURE 2
STEP2:
Insert tweJve 3 X 2"/NSERTGUH3ES(15) into the ends of each SAFETy/LML
,2. (NOTE:Makesure the INSERTGUIDES(I5) snap into the holes of the weldments.)(3) and
SECURELYassemble the six SPRINGPIN ASSEIVIBLI~S(12) to the | BAR SUPPORT | FIGUR~ |
| ||
|
| |
each BARSUPPOKT(4) as shown in FIGURE2. | SPRINGPIN BARRELSon each SAFETYRA./L | |