IMPORTANT NOTES
WELCOMETOTHEWORLDOF Serioussteel!
Please note:
* Thank you for purchasing the 435104 Leg Press Adapter Kit. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
*We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water.
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please follow these rules:
1.Inspect equipment daily. Tighten all loose connections and replace worn parts immediately. Failure to do so may result in serious injury.
2.Do not allow minors or children to play on or around this equipment.
3.Exercise with care to avoid injury.
4.If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800)
Tools Required for Assembly
*Rubber mallet or hammer
*3/4” wrench
*9/16” wrench
*Ratchet with 3/4” and 9/16” sockets
*7/32” Allen wrench
*Adjustable wrench
*Tape measure
Bolt Length Ruler
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOLT LENGTH
BOLT LENGTH RULER:
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
|
| 1/2 |
| |||||||||||
0 |
|
| 1 |
|
| 2 |
|
| 3 |
|
| 4 |
|
| 5 |
| 6 | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2