ParaBody 435104 manual Without

Page 7

 

14 3/8 X 2-1/4”

BASE

 

 

3/8” WASHER

3/8” WASHER

 

6

4-1/2” PULLEY

 

 

2-7/8” L-BRACKET

FIGURE 6

9 HEX NUT

3/8” LOCK NUT

STEP 6

SECURELY assemble the previously removed 4-1/2” PULLEY to the BASE using one 3/8 X 2-1/4” BOLT (14), two previously removed 3/8” WASHERS, one previously removed 2-7/8” L-BRACKET, one SWIVEL SNAP (6), one 3/8” HEX NUT (9), and one previously removed 3/8” LOCK NUT. See FIGURE 6.

 

 

TOP BOOM

FIGURE 7A

 

9 3/8” HEX NUT

 

 

(WITHOUT

 

 

445104 SECOND

3/8” WASHER

 

STACK OPTION)

5

3/8” LOCK NUT

 

STEP 7A

If the 445104 SECOND STACK OPTION is installed follow STEP 7B .

Remove one 3/8” WASHER and one 3/8” LOCK NUT from the 3/8” THREADED SHAFT on the TOP BOOM.

SECURELY assemble one 2” PULLEY (5) to the 3/8” THREADED SHAFT on the TOP BOOM using one previously installed 3/8” WASHER, one 3/8” HEX NUT (9) and one previously installed 3/8” LOCK NUT as shown in FIGURE 7A.

7

Image 7
Contents LEG Press Adapter KIT Important Notes Parts List Step Discard the two 3/8 X 1/2 Spacers Base Washer Without With Legpress Base Detail TOP Boom Spring PIN Adjustment