FIGURE 8
TOP BOOM
3/8” THREADED ROD
| 3/8” WASHER | |
3/8 X 1/2” SPACER | 3/8” HEX NUT | |
2”PULLEY | ||
| ||
| 3/8” LOCK NUT |
STEP 8
•Remove two 2” PULLEYS (5) to the rear bracket on the TOP BOOM using one 3/8” THREADED SHAFT (9), two 3/8” WASHERS, two 3/8” HEX NUTS (8), and two 3/8” LOCK NUTS (7) as shown in FIGURE 8.
•Discard the two 3/8 X 1/2” SPACERS.
FIGURE 9
TOP BOOM
| 3/8” THREADED ROD |
ELASTIC | 3/8” HEX NUT |
3/8” WASHER | |
CORD | 2”PULLEY |
| |
| 3/8” LOCK NUT |
STEP 9
•SECURELY assemble the two previously removed 2” PULLEYS, one previously removed 3/8” THREADED SHAFT, one previously removed
•Position the elastic cords over the 2” PULLEYS as shown in FIGURE 9.
7