TOP BOOM
TIGHTEN! (NOTE: Make sure
LAT CABLE runs over top of bolts in TOP BOOM.)
TIGHTEN!
1
FIGURE 16
STEP 16
•CAREFULLY lift or tilt the TOP BOOM and insert all GUIDE RODS into the bushings. See FIGURE 16.
•With the GUIDE RODS (1) securely held in the TOP BOOM. Tighten all TOP BOOM connections. (NOTE: Make sure the LAT
CABLE runs over the top of the bolts in the TOP BOOM.)
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
|
| 1/2 |
0 | 1 | 2 | 3 | 4 | 5 | 6 | ||||||
12