Spacer

FIGURE 8

10 3/8 X 2”

STEP 8

•Loop CABLE (13) around one 3-1/2” PULLEY (4) in the PULLEY BRACKET (2) and SECURELY assemble using one 3/8 X 2” BOLT (10), and two 3/8” WASHERS (8) and one 3/8” LOCK NUT (9) as shown in FIGURE 8.

STEP 9

•Remove one existing 3-1/2” PULLEY,two WASHERS, two 2” WHEELS and two SPACERS from the ADJUSTMENT TUBE on the 832 LEG PRESS OPTION by unfastening the 3/8 X 4-1/2” BOLT holding the pulley on. See FIGURE 9. (NOTE: The pulley will be used in STEP 12.)

FIGURE 9

3-1/2” PULLEY

2” WHEEL

3/8 X 4-1/2”

BOLT