STEP 6:
•Assemble the WEIGHT STACK PIN to the 20 HOLE WEIGHT STACK SHAFT as shown.
•Screw the WEIGHT STACK CABLE into the 20 HOLE WEIGHT STACK SHAFT of the HEAD PLATE until the CABLE slightly pulls on the HEAD PLATE.
•TIGHTEN cable jam nut securely!
•CAREFULLY assemble and SECURELY tighten any previosly removed or loos- ened bolts in the TOP BOOM to allow the GUIDE RODS to be secured. Refer to the
GYM ASSEMBLY INSTRUCTIONS .
WEIGHT STACK |
CABLE |
20 HOLE WEIGHT |
STACK SHAFT |
WEIGHT |
STACK PIN |
FIGURE 6 |
Thank you for purchasing the Parabody 216101 50 LB.
LifeFitness distributor or call the Parabody customer service department at (800)
5