STEP 2:
•Unscrew the WEIGHT STACK CABLE from the 15 HOLE WEIGHT STACK SHAFT as shown in FIGURE 2.
•Remove the WEIGHT STACK PIN from the 15 HOLE WEIGHT STACK SHAFT as shown.
WEIGHT STACK |
CABLE |
15 HOLE WEIGHT |
STACK SHAFT |
WEIGHT |
STACK PIN |
FIGURE 2 |
STEP 3:
•CAREFULLY remove or loosen bolts in the TOP BOOM to allow the GUIDE RODS to be tilted. Refer to the GYM ASSEMBLY INSTRUCTIONS .
•Tilt the GUIDE RODS back and remove the SHAFT COLLARS, HEAD PLATE ASSEMBLY, fifteen WEIGHT PLATES, two WEIGHT STACK CUSHIONS, two 3/4” WASHERS, and two WEIGHT STACK SPACERS as shown in FIGURE 3. (NOTE: Please discard the two 3/4”
WASHERS, and the two WEIGHT STACK SPACERS.)
FIGURE 3 | SHAFT COLLAR |
| |
| GUIDE ROD |
WEIGHT STACK SHAFT | |
| HEAD PLATE |
| WEIGHT PLATE |
WEIGHT STACK CUSHION | |
| 3/4” WASHER |
| WEIGHT STACK |
| SPACER |
| BASE |
3 |
|