Reebok Fitness RBBE1996.0 manual Attach the other Front Ankle Brace 22 in the same way

Page 11

14.Identify the two Rear Ankle Braces (80), which have holes in the indicated locations.

Slide a Rear Ankle Brace (80) onto the Ankle Brace Tube (18). Attach the Rear Ankle Brace with two M4 x 15mm Screws (58). Make sure that the Screws are tightened into the indi- cated holes in the Ankle Brace Tube. Next, press a 19mm Round Cap (45) into the Ankle Brace Tube, and attach the Round Cap with an M4 x 15mm Screw (58).

Attach the other Rear Ankle Brace (80) to the Ankle Brace Tube (18) in the same way.

15.Slide a Front Ankle Brace (22) onto the round tube on the Lock Frame (11). Next, press a 19mm Round Cap (45) into the round tube, and attach the Round Cap with an M4 x 15mm Screw (58).

Attach the other Front Ankle Brace (22) in the same way.

16.Pull the Short Adjustment Knob (74) out as far as it will go, and insert the end of the Leg Frame (10) a few inches into the Backrest Frame (8).

See the inset drawing. Press the round tab on the Leg Frame Bushing (38), and press the Leg Frame Bushing upward into the Backrest Frame (8). Make sure that the round tab is in the indicated hole in the Backrest Frame.

Then, slide the Leg Frame (10) farther into the Backrest Frame (8), and engage the Short Adjustment Knob (74) into one of the holes in the Leg Frame.

14

 

 

 

 

 

 

80

 

80

 

 

 

45

 

 

 

58

18

Holes

 

Holes

 

58

 

 

 

 

15

 

 

 

 

 

11

22

 

22

 

 

 

 

 

45

 

 

 

58

 

 

16

8

 

 

 

Hole

 

 

 

38

 

 

 

Tab

 

8

 

 

 

 

10

 

 

 

 

 

10

 

 

 

74

 

 

 

Holes

11

 

 

 

Image 11
Contents Mon.-Fri., 6 a.m.-6 p.m. MST QUESTIONS?Model No. RBBE1996.0 Serial No Call TOLL-FREETable of Contents Important Precautions Before YOU Begin Assembled DimensionsPart Identification Chart Repeat this step for the Right Base AssemblyMake Assembly Easier Before beginning assembly, make surePage See the inset drawing. Identify the Center Frame Bracket Grease Screws yet Attach the other Front Ankle Brace 22 in the same way Page Selecting the Backrest Frame Position AdjustmentAdjusting the LEG Frame Locking the Inversion Table Using the Ankle LockSetting the Inversion Angle Leveling the Inversion TableDo not sit up to return to the starting position Rotating on the Inversion TableDo not attempt to do sit-ups Developing a ProgramBeginner Program Full Inversion ProgramPage Qty Description Part LIST-Model No. RBBE1996.0R0107A Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty