ASSEMBLY
Make Things Easier for Yourself
This manual is designed to ensure that the weight bench can be assembled successfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly.
To hire an authorized service technician to assemble the weight bench, call
Before beginning assembly, carefully read the following information and instructions:
•Assembly requires two people.
•For help identifying small parts, use the PART IDENTIFICATION CHART.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly may require the following tools (not included):
• two adjustable wrenches
• one rubber mallet
• one standard screwdriver
• one Phillips screwdriver
•lubricant, such as grease or petroleum jelly, and soapy water.
Assembly will be more convenient if you have a socket set, a set of
1.Before assembling this product, make sure that you understand the information in the box above.
Press two 56mm Round Outer Caps (14) onto the Front Stabilizer (1).
Attach the Front Stabilizer (1) to the Front Leg (2) with two M8 x 67mm Carriage Bolts (21) and two M8 Nylon Locknuts (18). Make sure the indents in the Stabilizer and the decal on the Front Leg are in the positions shown. Do not tighten the Locknuts yet.
1
2
Name
Decal
18
18
14
1
14
Indents
21
5