Reebok Fitness RBBE0405.0 manual Nylon Locknut 17. Do not overtighten, Used in step

6. Attach the Backrest (9) to the Backrest Frames	6
(7) with four M6 x 37mm Screws (27) and four M6
Washers (30). Make sure the Backrest is ori-
ented as shown. Do not tighten the Screws		9
yet.
					7
			30		30
		30	30
			27
			27
7. Insert the Pivot Bracket (6) through the slot in the	7
Bench Frame (4).
Grease the M10 x 187mm Bolt (28) with the
included grease packet. Attach the Backrest
Frames (7) to the tube on the Bench Frame (4)	7
with the Bolt, two M10 Washers (19), and an M10
	17
Nylon Locknut (17). Do not overtighten the			Slot
	19
Locknut; the Backrest Frames must be able to
pivot easily.
Tighten the M8 Nylon Locknuts (18) used in			4
			19
step 5, and the four M6 x 37mm Screws (27)	Tube	6
			28
used in step 6.
			Grease
8. Attach the Locking Pin (15) to the Bench Frame	8
(4) with an M4 Washer (31) and an M4 x 16mm
Self-tapping Screw (22). Insert the Pin through
the Bench Frame and the Pivot Bracket (6).
					4
			15
			6	31	22
9. Attach an M8 x 15mm Bolt (29) to the Pivot	9
Bracket (6) with an M8 Nylon Locknut (18).
			6
			18
			29

7