Seated Row SU50 Customer Assembly Instructions
Figure 4. Bolt (viewed from the Seat Subframe section).
3.Tighten the nuts. Moving to the Weight Stack Subframe side of the SU50, place end cap washers and nuts onto the four bolt ends. Tighten the nuts so that they are completely over the threads of the bolt (upper bolt in Figure 5). When all the bolts are tight, snap the end cap covers onto both sides of the bolts. An end cap washer is shown in the lower part of Figure 5.
Figure 5. Nuts, end cap washers and end caps on the bolts.
4