SM10 Unpacking & Assembly Instructions
HARDWARE
Hardware Figure 1. Assembly Parts.
The parts shown in Hardware Figure 1 are used to assemble the SM10. They are:
A.7/16” x 5” hex head bolt (2)
B.7/16” flat washer (2)
C.7/16” cap washer (use on head end of the 6” bolt so end cap will fit on the nut) (2)
D.7/16” hex head nut (2)
E.End caps (bolt covers) (2)
PARTS LIST
Part # | ID | Description | Quantity |
| Main components | 1 | |
|
| ||
|
|
|
|
5” bolt hardware | 7/16” x 5” hex head bolt | 2 | |
A | |||
B | 7/16” flat washer | 2 | |
C | 7/16” cap washer | 2 | |
D | 7/16” Nyloc nut | 2 | |
E | End caps | 2 | |
|
|
|
|
| Handle and bar |
|
|
| hardware | Safety carabiner | 2 |
|
| ||
|
| Crossover handle | 1 |
|
| Leg strap | 1 |
|
|
|
|
7