TROUBLESHOOTING
1.Spark electrode does not produce spark.
a.Spark electrode broken - replace.
b.Ignitor wire may not be attached to spark electrode - attach.
c.Ignitor wire damaged - replace.
d.Piezo ignitor defective - replace.
2.Spark electrode produces spark but pilot does not light.
a.No gas to heater - turn on gas.
b.PILOT position not properly aligned - turn gas control knob to PILOT position and depress.
c.Pilot is blocked from spider web or dirt - clean pilot, see
Page 14.
3.Pilot flame does not stay “ON” when control knob is released.
a.Control knob in PILOT position not completely depressed or held in long enough.
b.INTERLOCK latching device is operative - see “Lighting Instructions,” Page 12, Step 9.
c.Thermocouple not tightened into gas control - tighten thermocouple.
d.Pilot flame not surrounding thermocouple - clean pilot, see Page 14.
e.Inlet gas pressure too low, contact gas supplier.
f.Thermocouple defective - replace.
g.Gas control defective - replace.
4.Main burner does not ignite.
a.
b.Inlet gas pressure too low, contact gas supplier.
5.Heater keeps shutting “OFF” during normal operation.
a.Pilot is blocked - clean pilot, see Page 14.
b.Inlet gas pressure too low, contact gas supplier
HOW TO ORDER REPAIR PARTS
Parts can be ordered only through your service person or dealer. For best results, the service person or dealer should order parts through the distributor. Parts can be shipped directly to the service person/dealer.
All parts listed in the Parts List have a Part Number. When ordering parts, first obtain the Model Number from the name plate on your equipment. Then determine the Part Number (not the Index Number) and the Description of each part from the following appropriate illustration and list. Be sure to give all this information.
Unvented Heater Model Number |
|
|
| Part Description |
|
| ||
|
|
| ||||||
Unvented Heater Serial Number |
|
|
|
| Part Number |
|
|
|
Type of Gas (Propane or Natural) |
|
|
|
|
|
|
|
Do not order bolts, screws, washers or nuts. They are standard hardware items and can be purchased at any local hardware store. Shipments contingent upon strikes, fires and all causes beyond our control.
PARTS LIST
PLEASE NOTE: When ordering parts, it is very important that part number and description of part coincide.
INDEX | PART |
| INDEX | PART |
|
| |
NUMBER | NUMBER | DESCRIPTION | NUMBER | NUMBER | DESCRIPTION |
| |
|
|
|
|
|
| ||
1 | 13347 | CASING SIDE ASSEMBLY - LEFT | 15 | PILOT ASSEMBLY (NAT ONLY) | |||
|
| (INCLUDES ITEMS 16 & 17) | |||||
2 | CASING BACK |
|
| ||||
16 | PILOT THERMOCOUPLE |
| |||||
3 | PIEZO IGNITOR |
| |||||
17 | SPARK IGNITOR |
| |||||
4 | CASING SIDE ASSEMBLY - RIGHT |
| |||||
18 | PILOT BRACKET (NAT) |
| |||||
5 | VALVE BRACKET |
| |||||
18 | PILOT BRACKET (LPG) |
| |||||
6 | GAS VALVE |
| |||||
19 | ORIFICE SHIELD |
| |||||
7 | 12438 | TUBING - GAS VALVE TO BURNER |
| ||||
20 | CHROME GRILL |
| |||||
8 | 12437 | TUBING - INLET REGULATOR TO GAS |
| ||||
21 | CASING LOUVER (2 REQUIRED) | ||||||
|
| VALVE | |||||
|
| 22 | REFLECTOR ASSEMBLY |
| |||
9 | 10753 | INLET REGULATOR BRACKET |
| ||||
23 | HEAT SHIELD |
| |||||
10 | INLET REGULATOR - NAT |
| |||||
24 | BULB CLIP |
| |||||
10 | INLET REGULATOR - LPG |
| |||||
25 | OPTIONAL | ||||||
11 | TUBING - GAS VALVE TO PILOT | ||||||
NS | IGNITOR WIRE |
| |||||
12 | ORIFICE HOLDER |
| |||||
NS | HARDWARE PACKAGE |
| |||||
13 | MAIN BURNER ORIFICE - NAT |
| |||||
|
|
|
| ||||
13 | MAIN BURNER ORIFICE - LPG |
|
|
|
| ||
14 | BURNER |
|
|
|
| ||
15 | PILOT ASSEMBLY (LPG ONLY) |
|
|
|
| ||
|
| (INCLUDES ITEMS 16 & 17) |
|
|
|
| |
Page 16 | Empire Comfort Systems, Inc. Nine Eighteen | Freeburg Ave. Belleville, Illinois | |||||
|
|
|
|
|