SM21 Unpacking & Assembly Instructions
HARDWARE
Hardware Figure 1. Assembly Parts.
The parts shown in Hardware Figure 1 are used to assemble the SM21. They are:
A.7/16” x 6” hex head bolt (used to bolt connecting beam to the tops of the cells)
B.7/16” flat washer
C.7/16” cap washer (use on head end of the 6” bolt so end cap will fit on the nut)
D.7/16” hex head nut
E.End caps (bolt covers)
PARTS LIST Hardware Kit:
Part # | ID | Description | Quantity |
| Main components | 2 | |
| 1 | ||
| 2 | Connecting beam | 1 |
|
|
|
|
6” bolt hardware | 7/16” x 6” hex head bolt | 4 | |
A | |||
B | 7/16” flat washer | 4 | |
C | 7/16” cap washer | 4 | |
D | 7/16” Nyloc nut | 4 | |
E | End caps | 4 | |
|
|
|
|
| Handle and bar |
|
|
| hardware | Safety carabiner | 2 |
|
| ||
|
| Crossover handle | 2 |
|
| Leg strap | 1 |
|
|
|
|
8