Life Fitness GS1 manual X 3 X 3-3/4

Page 17

 

11

3/8 x 3” 29

1

 

 

41

 

34

3/8 x 3-3/4” 30

 

 

42

24

 

FIGURE 14

34

 

36

 

21

STEP 14:

Refer to cable ILLUSTRATION “A” on page 13 for cable routing while installing pulleys.

[CABLE MUST BE POSITIONED BETWEEN PULLEY AND LOWER BOLT ASSEMBLY ON LEG PEDESTAL (11) AND FRAME (1)]

Securely assemble the ball end of the LOW CABLE (21) and one 3-1/2” PULLEY (24) to the LEG PEDESTAL (11) using two 3/8 X 3-3/4” BOLTS (30), two 3/8” X 1-1/16” FLANGE SPACERS (42), two 3/8” WASHERS (36), and two 3/8” LOCKNUTS

(34). (NOTE: The LEG CABLE (21) should be routed over the retaining bolt as shown in FIGURE 14.)

• Securely assemble one 3-1/2” PULLEY (24) and two 3/8 X 3/4 FLANGE SPACERS (41) to the FRAME (1) using one

3/8 X ” BOLTS (29), and one 3/8” LOCKNUT (34). (NOTE: The LEG CABLE (21) should be routed over the retaining bolt as shown in FIGURE 14.)

17

Image 17
Contents GS1 GYM System Important Safety Information Important Notes Page Parts List Step Page Step Push Forward and Hold 33 1/2 X 8-3/4 X 3 32 1/2 X 104mm Illustration a 31 3/8 X 8-3/4 X 3-3/4 31 3/8 X 8-3/4 27 3/8 X 1-3/4 Securely Tighten JAM NUT Weight Stack Shaft X 3 X 3-3/4 X 1 -3/4 X 3-3/4 Step Adjustment Maintenance Limited Warranty Life Fitness Consumer Division