| 17 |
|
|
| ADJUSTMENT |
|
| 19 TIGHTEN |
|
| JAM NUT |
| ADJUSTMENT 53 | SECURELY |
26 | 57 |
|
|
| |
25 |
|
|
|
| 51 |
59 |
|
|
FIGURE 17 |
|
|
STEP 17:
•If upon completion of assembly, the HEAD PLATE (19) does not sit on top of the first WEIGHT PLATE (22), push the HEAD PLATE (19) down, insert the WEIGHT SELECTOR PIN (51) and perform several repetitions at the press station. This will relax the cable system and prevent the HEAD PLATE (19) from lifting up. See FIGURE 17
•If after completing previous step, the HEAD PLATE (19) still does not sit on top of the first WEIGHT PLATE (22) or if there is excess slack in the cable system, adjust the threaded end of the LAT CABLE (20) and ADJUSTABLE GLIDE (53) accordingly and retighten the jam nuts. See figure 17
•For maximum performance, the HEAD PLATE (19) should just barely sit on the top WEIGHT PLATE (22)
•Attach the LAT BAR (17) to the ball end of LAT CABLE (20) using one SNAP LINK (57) as shown in FIGURE 17.
•Attach the ANKLE STRAP (25) to the 12 LINK CHAIN (26) using two SNAP LINKS (57) as shown in FIGURE 17
Thank you for purchasing the ParaBody GS1 Gym System. If unsure of proper use of equipment, call your local ParaBody distributor or call the ParaBody customer service department at (800)
20