B C
1 |
A
A
| D |
| G |
|
| 7 | |
E |
| F | |
|
| ||
|
|
|
STEP 7:
Spotter Platform accessories are available for the HDMR8.
Assemble each Spotter Platform (A) to the FRONT LEFT & RIGHT UPRIGHTS (1 & 7) using two BOLTS (B), two DOME WASHERS (C), two SPACERS (D), one WEAR PLATE (E), two FLAT WASHERS (F), and two NUTS (G) as shown in the illustration.
NOTE: All necessary hardware for the Spotter Platform assembly is included with the accessory. Make sure the flange on the SPACER (D) faces the inside of the rack.
15