Panasonic SC-PT465, sc-pt460 To adjust speaker level during play, Adjusting the subwoofer level

Adjusting the subwoofer level

You can adjust the amount of bass. The unit automatically selects the most suitable setting according to the type of playback source.

SUBWOOFER	SUB W 1#SUB W 2#SUB W 3
LEVEL	^---------------------------------------------------	}

-CH SELECT

≥To check the current setting, press [SUBWOOFER LEVEL].

≥The setting you make is retained, and recalled every time you play the same type of source.

Using Subwoofer Boost

Main unit only

You can enhance the subwoofer effect with strong bass.

SW BOOST indicator		BST ON,------.BST OFF
	SW	The SW BOOST indicator lights when
	BOOST	Subwoofer Boost is turned on.

Adjusting the speaker level

You can adjust the surround sound levels.

Preparation

≥Press [i, ` VOL] to adjust the volume to normal listening level.

≥Select “TEST TONE” from “SPEAKER SETTINGS” in “AUDIO” menu (➜ 24).

1 Enter test tone mode.

OK	e.g.	AUDIO - SPEAKER SETTINGS - TEST TONE
		SPEAKERS	TRIM LEVEL
		LEFT	− −
		CENTER	0dB
		RIGHT	− −
		SURROUND RIGHT	0dB
		SURROUND LEFT	0dB
		SET
		RETURN	EXIT : SETUP

Test tone will be output to each channel in the following order.

LEFT, CENTER, RIGHT,

SURROUND RIGHT, SURROUND LEFT

2		Adjust the speaker level for each	effects
	OK	speaker. (CENTER, SURROUND
		RIGHT, SURROUND LEFT)	sound
		`6 dB to i6 dB
		≥To exit the screen, press [SETUP].	Using
∫ To adjust speaker level during play

(Effective when playing 5.1-channel sound or when Dolby Pro Logic II is on.)

1Press and hold [—CH SELECT] to select the speaker.

While the speaker channel is displayed, press [—CH SELECT]. L #C #R #RS #LS #SW

^----------------------------------------------}

≥You can adjust SW (Subwoofer) only if the disc includes a subwoofer channel and “ÎPLII” is not lit.

2Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker.

C, RS, LS, SW: `6 dB to i6 dB

(L, R: Only the balance is adjustable.)

To adjust the balance of the front speakers, while “L” or “R” is selected, press [2, 1].

RQTX0088

31