1 |
|
1/2 X 3” 28 |
|
29 |
|
7 | 30 |
| |
| 22 |
FIGURE 3 |
|
STEP 3
•Slide one 2” SQ. COVER CAP (22) over the end of the WEIGHT STACK BASE (7) as shown in FIGURE 3.
•SECURELY assemble the WEIGHT STACK BASE (7) to the UPRIGHT (1) using two 1/2 X 3” BOLTS (28), two 1/2” WASH- ERS (29), and two 1/2” LOCK NUTS (30) as shown in FIGURE 3.
STEP 4
•Insert two WEIGHT PLATE BUSHINGS (42) into the “PARABODY” side of each of the twenty WEIGHT PLATES (43) as shown in FIGURE 4.
42
43
FIGURE 4
5