Life Fitness 8205 manual Step

STEP 13:

•Loop the threaded end of the CABLE (18) around a 4-1/ 2” PULLEY (13) and SECURELY assemble the 4-1/2” PULLEY (13) to the UPPER PULLEY HOUSING (8) using one 3/8 X 2-3/4” BOLT (34), two 3/8” FLANGE SPACERS (20), and two 3/8” LOCK NUTS (28). See FIGURE 13.

•Slide the 13/16” SHAFT COLLARS (42) to the top of the GUIDE RODS (10) and SECURELY tighten the set screws of the SHAFT COLLARS (42). See FIGURE 13.

FIGURE 13

2 8

8

4 2

13

1 8

2 0

34 3/8 X 2-3/4”

14