Life Fitness 8205 manual Cable is in the groove of the Pulley

STEP 14:

•Route the threaded end of the CABLE (18) through the LOWER PULLEY HOUSING (6) as shown in FIGURE 14.

•Slip one 4-1/2” PULLEY (13) over the CABLE (18) and SECURELY assemble the 4-1/2” PULLEY (13) to the LOWER PULLEY HOUSING (6) using one 3/8 X 2-3/4” BOLT (34), two 3/8” FLANGE SPACER (20) and one 3/8” LOCK NUT (28) as shown in FIGURE 14. (Make sure the

CABLE is in the groove of the PULLEY.)

STEP 15:

•Slip one 4-1/2” PULLEY (13) over the CABLE (18) and SECURELY assemble the 4-1/2” PULLEY (13) to the LOWER PULLEY HOUSING (6) using one 3/8 X 2-3/4” BOLT (34), two 3/8” FLANGE BEARINGS (20) and one 3/8” LOCK NUT (28) as shown in FIGURE 15. (Make sure the CABLE is in the groove of the PULLEY.)

		1 8
		2 8
	2 0	1 3
FIGURE 14		6
	34 3/8 X 2-3/4”
	1 8

2 8 2 0

1 3

FIGURE 15

6

34 3/8 X 2-3/4”

1/2

1/2

1/2

1/2

1/2

1/2

0

1 2 3 4 5

15

6