TOWER | X 4" BOLT |
BRACE | (EXISTING) |
FIGURE 5
STEP5:
Place TOWERBRACEover the GUIDERODS(2) and securely fasten TOWERBRACE.to TOWER using previously remow~d1/2" X 4" BOLTS,1/2" WASHERS,AND1/2" NUTSas shown in FIGURE5.
TOWER
BRACE
,TOP BOOM
CABLE'
FIGURE 6
STEP6:
Route threaded end of CABLE(part # 6671601) around pulleys in TOPBOOMand PULLEYBLOCK ASSEMBLYRoute. CABLE(part # 6671601) down through hole in TOWERand TOWERBRACE shown in FIGURE6.