Life Fitness 889 manual Step

Page 11

	1
31	33
10	33
10
11
	30
	32 3/8 X 2-3/4”
FIGURE 11

STEP 11:

•Route the threaded end of the 124” CABLE (11) through the slot of the UPRIGHT (1) then SECURELY assemble one 4-1/2” PULLEY

(10)to the UPRIGHT (1) using two 3/8 X 2-3/4” BOLTS (32), two 3/8” FLANGE SPACERS (33), two 3/8” WASHERS (30), and two 3/8” LOCK NUTS (31). (NOTE: The CABLE (11) should be routed between the pulley and the retaining bolt as shown in FIGURE 11.)

Image 11

Contents Weight Stack Option Important Safety Information Important Notes Parts List Step Upright Frame Lower Cross Support LOW Height Locknut Step Upright Upper Cross LOW Height 32 3/8 X 2-3/4 Step Step Tighten Jamnut Step Maintenance Limited Warranty Life Fitness