Life Fitness 889 manual Step

					STEP 6:
					• Insert two GUIDE RODS (6) into the STACK
					BASE (3) as shown in FIGURE 6. Lubricate the
					GUIDE RODS (6) with a silicon or teflon
					spray that is available at most hardware stores.
			15		• Slide two WEIGHT STACK CUSHIONS (26)
					down over the GUIDE RODS (6). See FIGURE 6.
					• Using EXTREME CARE slide twenty WEIGHT
			6		PLATES (40) down over the GUIDE RODS (6)
					with the key-hole facing as shown in FIGURE 6.
					• Carefully Slide the HEAD PLATE ASSEMBLY
					(39 & 40) down over the GUIDE RODS (6)
	HEAD PLATE				onto the weight stack as shown in FIGURE 6.
	ASSEMBLY				• Slide two 13/16” SHAFT COLLARS (15) over
		40			the GUIDE RODS (6) as shown in FIGURE 6.
					• Apply one set of WEIGHT STACK LABELS -
					1-26 (41) to each WEIGHT PLATE (40) as
		41			shown in FIGURE 6.
				26
	3
			FIGURE 6
1/2	1/2	1/2	1/2	4	1/2	1/2
0	1	2	3		5	6
			7