Life Fitness 897104 manual Step

FIGURE 2	1/2 X 2-1/2”
	TOP BOOM
	1/2 X 3”
	3/8 X 2-3/4”
	UPPER
	CROSS
	SUPPORT
	UPRIGHT FRAME
	3/8 X 4”

STEP 2:

•LOOSEN the TOP BOOM from the UPRIGHT FRAME by removing one 1/2 X 2-1/2” BOLT, one 1/2 X 3” BOLT, one 3/8 X 2-3/4” BOLT, two 1/2” WASHERS, one 1/2” LOCK NUT, and one 3/8” LOCK NUT as shown in FIGURE 2.

•LOOSEN the TOP BOOM from the UPPER CROSS SUPPORT by removing two 3/8 X 4” BOLTS, four 3/8” WASHERS and two 3/8” LOCK NUTS. See FIGURE 2.

•REMOVE TOP BOOM.

2” SQ. END CAP

CARRIAGE

UPRIGHT FRAME

FIGURE 3

STEP 3:

•Remove and discard one 2” SQ. END CAP from the end of the UPRIGHT FRAME as shown in FIGURE 3.

•Slide the CARRIAGE off the UPRIGHT FRAME and discard as shown in FIGURE 3.

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5		6

4