Image IMEL2105.1 user manual

Page 8

8.Identify the Left Handlebar (9) and the Left Handlebar Leg (73), which are marked with stickers.

Insert the Left Handlebar (9) into the Left Handlebar Leg (73). Make sure that the indicated tube on the

Left Handlebar and the hexagonal holes in the Left Handlebar Leg are on the same side. Attach the Left Handlebar with two M8 x 42mm Button Bolts (50) and two M8 Nylon Locknuts (46). Do not tighten the Button Bolts yet.

Attach the Right Handlebar (not shown) to the Right Handlebar Leg (not shown) in the same way.

9.Insert the Pivot Axle (38) into the Upright (2). Apply a generous amount of the included grease to the Pivot Axle.

Identify the Left and Right Handlebars (9, 10), which are marked with stickers. Have another person hold the Left Handlebar near the left end of the Pivot Axle (38). Slide a Handlebar Spacer (25) onto the indicated tube on the Left Handlebar; make sure that the

Handlebar Spacer is oriented as shown, with the smaller cutout on top. Then, slide the Left Handlebar onto the Pivot Axle.

Assemble the Right Handlebar (10) in the same way.

Tighten an M8 x 19mm Button Screw (22) with an M8 Large Washer (17) and a Small Wave Washer (90) into each end of the Pivot Axle (38). Make sure the Wave Washers are on the Pivot Axle. Orient the two Handlebar Caps (23) as shown, and press the small tabs on the Handlebar Caps into the two Handlebar Spacers (25).

Gently separate the two Upright Covers (82). Hold the Upright Covers around the Upright (2), and firmly press the Upright Covers together.

10.Identify the Left Pedal (13), which has an “L” molded into its bottom surface, and the Left Pedal Arm (14), which is marked with a sticker.

Attach the Left Pedal (13) to the Left Pedal Arm (14) with two M8 x 46mm Button Screws (20) and two M8 Split Washers (74).

Attach the Right Pedal (not shown) in the same way.

8

8

 

 

 

 

 

 

9

 

 

 

 

 

Tube

 

 

 

 

46

 

 

 

50

Hexagonal

 

 

 

 

 

 

 

 

Holes

 

 

73

 

 

9

 

 

 

 

 

 

 

10

 

 

 

82

 

23

 

 

 

 

 

 

 

 

22

 

9

Grease

90

17

 

 

25

 

 

 

 

 

17

90

 

38

 

22

 

25

 

82

 

 

 

 

 

 

Tube

2

 

 

 

 

 

23

 

Tab

 

 

10

 

 

 

 

 

 

 

13

 

 

74

 

14

 

 

 

 

 

 

 

20

74

 

 

 

 

 

Image 8
Contents QUESTIONS? Model No. IMEL2105.1 Serial NoCall TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Front Before YOU BeginBack Assembly Page Insert the Console Bracket 26 into the Upright Page HOW to USE the Elliptical Exerciser HOW to Exercise on the Elliptical ExerciserResistance Programs Console Drawing Features of the ConsoleMyTracks StepCounter HOW to USE the Manual Mode Begin pedaling to start the program HOW to USE a Resistance ProgramSelect a resistance program HOW to USE the Mytrackstm Stepcounter Program Select the MyTracks StepCounter programMaintenance and Troubleshooting Console TroubleshootingHandgrip Pulse Sensor Troubleshooting HOW to Adjust the Reed SwitchConditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Toe Touch StretchHamstring Stretch Calf/Achilles StretchPage Part LIST-Model No. IMEL2105.1 Qty DescriptionExploded DRAWING-Model No. IMEL2105.1 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT HOW to Order Replacement PartsLimited Warranty