english
censed for KETTLER Sports apparatus and available from the Sport specialized trade.
●Please ensure that liquids or perspiration never enter the ma- chine or the electronics.
●The equipment is independent of revolutions per minute.
●A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation. Possibly occurring noise during reverse pedalling re- sult from engineering and are absolutely safe.
●The crosstrainer has a magnetic brake system.
●To operate correctly, the pulse function requires a minimum vol- tage of 2,7 volts (only for computers working with batteries).
●Before beginning your first training session, familiarize yourself thoroughly with all the functions and settings of the unit.
●The surface on which the unit is placed must be firm and even. Place rubber or straw mats under it to deaden any noise or im- pacts. Only for appliances with weights. Avoid powerful oscil- lations of the dumbbells!
Instructions for Assembly
●Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer.
●Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the dia- grams. The correct sequence is given in capital letters.
●Please note that there is always a danger of injury when wor- king with tools or doing manual work. Therefore please be ca- reful when assembling this machine.
●Ensure that your working area is free of possible sources of dan- ger, for example don’t leave any tools lying around. Always dispose packaging material in such a way that it may not cau- se any danger. There is always a risk of suffocation if children play with plastic bags!
●The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if possible technically talented.
●The fastening material required for each assembly step is sho- wn in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equipment.
●Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be repla- ced.
●For technical reasons, we reserve the right to carry out prelimi- nary assembly work (e.g. addition of tubing plugs).
List of spare parts page 30-32
When ordering spare parts, always state the full article number,
Example order: Art. no.
Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (in- ternal) packaging, which is safe for transportation, in the original box if possible.
It is important to provide a detailed defect description / damage report!
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated on the order by adding the words „with fastening material“.
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites).
GB KETTLER GB Ltd.
KETTLER House, Merse Road · North Moons Moat · Red- ditch, Worcestershire B98 9HL
http://www.kettler.co.uk
USA KETTLER International Inc.
1355 London Bridge Road · Virginia Beach, VA 23453 http://www.kettlerusa.com
5