17
Assembly
Step 10
Note: Stretch all cables out completely and make sure all twisting is removed before install- ing.
Install Mid Pulley Cable (77) as detailed in Figure 10. Follow dotted lines to identify exact location of pulleys.
Start by installing cable under the pulley at Leg Extension location.
You will need the following for installation: |
|
|
| |
Pulley (30) - Qty. 7 |
|
|
| |
Bolt (79) - Qty. 2 | Small Pulley (94) - Qty. 1 | |||
Cable (77) - Qty. 1 | Bolt (80) - Qty. 1 |
| Pulley Bracket (71) - Qty. 1 | |
Nylon Locknut (93) - Qty. 8 | Bolt (81) | - Qty 1 |
| Cable Retainer (29) - Qty 1 |
Long Pulley Spacer (75) - Qty. 6 | Bolt (82) | - Qty. 1 |
|
|
Longer Pulley Spacer (72) - Qty. 4 | Bolt (84) | - Qty. 3 |
|
|
Short Pulley Spacer (74) - Qty. 2 | Washer (91) - Qty. 16 |
|
| |
|
|
|
|
|
Figure 10