Assembly
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 3
Slide the Sliding Weight Holder (#10) onto the Vertical Frame (#8). Attach two Spring Clips 1”(#31) to the posts on the Sliding Weight Holder.
Insert the Upper Frame (#9) onto the top opening on the Vertical Frame (#8). Align the bottomhole on the top of the Vertical Frame. Secure it with one M10 x 80 Hex Bolts (#43) and two Washers Dia10 (#39).
Attach the Lat Bar Holder (#26) to the front of Upper Frame (#9). Secure it with one M10 x 80 Hex Bolts (#43), two Washers Dia10 (#39), and one M10 Aircraft Nut (#38).
Attach the Lat Bar (#11) to the Cable End with a Clip (#30).
8