ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 1
Begin by connecting the front base frame (4) and rear base frame (5) to the side
frames (1) using: |
|
|
8 x (22) Bolt | 16 x (25) Washer | 8 x (26) Nylon Locknut |
Attach angle support (11) to rear base frame (5) using: | ||
2 x (23) Bolt | 4 x (28) Washer | 2 x (27) Nylon Locknut |
Attach main upright (6) to front base frame (4) using: | ||
2 x (23) Bolt | 4 x (28) Washer | 2 x (27) Nylon Locknut |
Connect angle support (11) to main upright (6) using: | ||
2 x (22) Bolt | 4 x (25) Washer | 2 x (26) Nylon Locknut |
v