Assembly Instruction

8.Keep the bike out of reach for children who should not be in the immediate area when it is being used.

9.Stop exercise immediately in case of nausea, shaking, short- ness of breath, pain in the chest or headache.

10.Do not exercise 45 minutes before eating or 1 hour after eating.

11.Consult your physician doctor if needed.

STEP 1:

Mount the front stabilizer (#3) and rear stabilizer (#2) to the frame (#1) with four carriage bolts (#4), four washers (#5), four spring washers (#6) and four cap nuts (#7). Please note that the carriage bolts are inserted from the bottom. (See dia- gram.) Tighten the nuts by using the supplied spanner.

STEP 2:

Attach the left pedal (#8) to the left crank. The pedals are marked L and R on the flat face of the threaded area. The left and right crank arms are referenced from a seated position on the bike. Please note that the left pedal (#8) has a left-hand thread and must be tightened counter clockwise. The right pedal (#8) has a right-hand thread and must be tightened clockwise. Tighten the thread of pedals by using the supplied spanner.

STEP 3:

Insert the seat post (#9) into the frame (#1) and secure the seat post with the locking pop pin knob (#12). Slide the seat- adjusting bracket (#11) into the top of the seat post (#9) and secure with

the locking pop pin knob (#12).

STEP 4:

Insert the handlebar stem (#13) into the frame (#1) and secure with locking pop pin knob (#12).