Assembly
Step 3 (Figure 3)
A)Connect Upper Wire Harness and Heart Rate Wire (H9 & H10) to Lower Wire Harness and Heart Rate Wire (A34 & J13).
Note: Upper Wire Harness and Sensor Wire will already be inside the Console Tube (H1).
B)Slide Console Tube (H1) into Main Frame and secure using four Flat Allen Head Bolts (H8). Insert Decoration Cap (B4) into lower console tube bolt hole of each side.
Figure 4
7
Figure 3
Step 4 (Figure 4)
A)Connect Upper Wire Harness and Heart Rate Wire (H9 & H10) to Console (H6).
B)Secure Console (H6) and Reading Rack (H12) to Console Tube (H1) using six Round Head Screws (H5) and six Flat Washers (H7).