Programmable Training Computer
FUNCTION BUTTON
START/STOPTo start or stop monitor counting.
MODE | To enter all functions, age, and training programs | ||
UP/DOWN | To adjust and set all functions, personal data, and training programs | ||
RESET | To have the monitor jump to initial display for training mode selection. If you hold on | ||
| pressing the button for 2 seconds, the monitor will reset previous training and jump to | ||
| user code selection. |
| |
FUNCTIONS |
|
|
|
RPM | To display current training rotations per minute. | ||
SPEED | To display current training speed. | ||
TIME | Count up - To accumulate training time from 0:00 to 99:59 with one second increment | ||
| when the training starts.(No preset target) | ||
| Count down - The monitor will start to count from preset time down to 0:00 with one | ||
| second decrement when the training starts. As soon as the preset time is | ||
| achieved, the monitor starts to alarm, and TIME will start to count up | ||
| immediately from 0:00. | ||
DISTANCE | Count up- To accumulate training distance from 0.00 to 999.9 with 0.01 km (ml) increment | ||
| when the training starts. (No preset target) | ||
| Count down- The monitor will start to count from preset distance down to 0.00 with 0.01 | ||
| km (or ml) decrement when the training starts. As soon as the preset distance | ||
| is | achieved, the | monitor starts to alarm, and DISTANCE will start to count |
| up | immediately | from 0.00. |