Assembly of CardioMax Exercise Bike
1. Attach the front and rear stablilizer (2,7) to the main frame (1) with the carriage bolts, nuts. (4, 5, 6, 9).
4
1
2
6
| 5 |
|
1 | 5 | 7 |
| 6 | |
| 5 |
|
| 6 |
|
9
2.Tighten the pedals (19, 23) into the crank. Tighten each pedal by turning the bolt towards the front of the bike. NOTE: Each pedal is labeled with a “R” for right or “L” for left. (Tighten the left pedal by turning
18
23 | 1 |
|
2
3.Hold the handlebar post (51) to the frame and connect the sen- sor wires. Feed the tension cable up through the handlebar post. Insert the post into the frame and attach it with screws and washers. (52, 6).
51 |
|
|
| 6 | 52 |
|
| |
52 |
|
|
6 | 56 | 3 |
| ||
| 49 |
|
|
| 1 |
4.Attach seat bottom and seat back support onto the seat locking system with screws (72, 66) and washers (67), and then slide the seat locking system onto the seat post.
67 |
|
72 |
|
72 | 4 |
6867
67
66
6 | 7 |