Connecting Other Equipment
You can connect both analog and digital equipment.
•DO NOT connect any equipment while the power is on.
•DO NOT plug in any equipment until all connections are complete.
To connect an analog component
Be sure that the plugs of the audio cords are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.
Connect an optical digital cord (not supplied) between the optical digital input terminal on the other equipment and the DIGITAL OUT [OPTICAL] terminal.
NOW, you can plug in the unit and other connected equipment FINALLY!
Cancelling the Display Demonstration
When connecting the AC power cord into an outlet, the unit automatically starts display demonstration.
To cancel the display demonstration, press any button on
To audio output
AUX IN
Audio/video equipment
the unit or on the remote control.
If you press one of the following buttons — source buttons, 0(CD tray open/close) button, and disc number buttons (CD1, CD2, CD3)
The unit turns on.
To start the display demonstration manually
For playing the other equipment through this unit,
connect between the audio output jacks on the other equipment and AUX IN jacks by using audio cords (not supplied).
To connect audio equipment with an optical digital input terminal
You can record CD sound onto the connected digital equipment.
DIGITAL OUT | Protective |
( OPTICAL ) | plug |
|
Press and hold DEMO on the unit for more than | /DEMO |
| CANCEL |
2 seconds. |
|
To optical digital input
Before connecting the other equipment, remove the protective plug from the terminal.
Audio equipment with an optical digital input
– 8 –