JVC SP-MXKC4 Using the Timers, Setting the Clock, Fixing the Clock, Press the CLOCK/TIMER button

Using the Timers

STANDBY/ON

SLEEP

SLEEP

AUX

FM MODE FM /AM

CLOCK/TIMER

SET

CD1	CD2	CD3	CD
REPEAT	PROGRAM/RANDOM
		TAPE A TAPE B
SOUND			VOLUME
MODE
		FADE
	RHYTHM AX	MUTING

REMOTE CONTROL

DAILY Timer indicator

SLEEP indicator

REC (Recording) Timer indicator

Timer indicator

¢

4

*When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.

Three types of timers are available:

DAILY Timer

Use this timer to set wake up everyday to music from any source, instead of an alarm clock.

REC (Recording) Timer

Unattended recording of radio broadcasts. You can set the starting time and ending time.

SLEEP Timer

Fall asleep and have your System turn off automatically after a certain length of time.

Setting the Clock

When you plug the AC power cord into the wall outlet, the time in- dication “0:00” blinks on the display.

You can set the clock whether the System is on or off.

Using the Unit

1 Press the CLOCK/TIMER button.

The hour digit of the time indication blinks on the display.

2 Press the 4or ¢button to set the hour. Pressing the ¢button moves the time forwards and pressing the 4 button moves it backwards. Holding down the button moves the hour rapidly.

3 Press the SET button.

The minute digits of the time indication blink on the display.

• To return to the hour setting, press the CANCEL button.

4 Press the 4or ¢button to set the minute. 5 Press the SET button.

“CLOCK OK” appears on the display. Then, the selected time is set and the seconds start counting from 0.

Fixing the Clock

Using the Unit

1 Press the STANDBY/ON button to turn on the System.

2 Press the CLOCK/TIMER button repeatedly until clock setting display (time indication) appears on the display.

Each time you press the button, display changes as follows: DAILY = ON TIME = REC = ON TIME = Clock Setting display (time indicator) =Canceled =(back to the beginning)

3 Press the SET button.

The hour digits of the current clock blink on the display.

4 Follow steps 2 to 5 of “Setting the Clock” men- tioned above.

•The clock must be correctly set for the timers to work.

•Each setting step must be completed within approx. 30 seconds. Otherwise, the setting is cleared and must be repeated from the beginning.

•The clock may gain or lose one to two minutes per month.

•If there is a power failure, the clock loses its setting immediately. “0:00” blinks on the display and the clock must be reset.

20