JVC 0205NYMCREBET, LVT1343-006A, SP-MXKC4 manual Presetting Stations

Page 71

Using the Tuner

2 Select a station using one of the following methods.

•Manual Tuning

Briefly press the 22or Á button to move from frequency

to frequency until you find the station you want.

OR

•Auto Tuning

If you hold down the 22 or Á button for 1 second or more and then release it, the frequency changes down, or up,

automatically until a station is found.

OR

•Preset Tuning (Possible only after presetting sta- tions)

Preset tuning using the Unit:

Select the preset number you want, using the 4 or ¢ button.

Example:

Press the ¢ button until the preset number “P12” appears on the display. Then, the display will show the preset number’s band and frequency.

Preset tuning using the Remote Control:

Enter the preset number you want to recall using the numer- ic keys. See “Entering the Number with the Remote Con- trol” on page 8.

Example:

Press +10, then 2 to recall the preset number 12. Then, the display will show the preset number’s band and frequency.

•In AM broadcast, reception sensitivity will be changed by turning the AM loop antenna. Turn the AM loop antenna for best reception.

Presetting Stations

You can preset up to 30 FM stations and up to 15 AM stations.

•Preset numbers may have been set to factory test fre- quencies prior to shipment. This is not a malfunction. You can preset the stations you want into memory by following one of the presetting methods below.

•During presetting stations, if no button operation is made for 5 seconds, the display returns to the band/frequency display. In this case, repeat steps from the beginning.

TUNING

SET

PRESET

SET

or

 

or

 

 

FM=30, AM=15

 

When changing the Band

Using the Unit

1 Select a band by pressing the FM/AM button. 2 Press the 22or Ábutton to tune in a sta-

tion.

3 Press the SET button.

“SET” will blink for 5 seconds.

4 While “SET” is blinking, press the 4or ¢ button to select the preset number.

¢: Increases the preset number by 1.

4: Decreases the preset number by 1.

5 Press the SET button.

“STORED” appears and, after 2 seconds, the display returns to the band/frequency display.

6 Repeat above steps 2 to 5 for each station you want to store in memory with a preset number.

To change the preset stations, repeat the same steps as

above.

•In step 4, you can select the preset number using the nu- meric keys on the Remote Control. See “Entering the Number with the Remote Control” on page 8.

CAUTION:

•Even if the System is unplugged or if the power failure occurs, the preset stations will be stored for a few days. However, in case the preset sta- tions are erased, you will need to preset the sta- tions again.

To Change the FM Reception Mode

When you are tuned in to an FM stereo broadcast, the “ST (Ster- eo)” indicator lights up and you can hear stereo effects.

If an FM stereo broadcast is hard to receive or noisy, you can select Monaural mode. Reception improves, but you lose stereo effect.

Press the FM MODE button on the Remote Control so that the “MONO” indicator lights up on the display.

FM MODE

ST MONO

To restore the stereo effect, press the FM MODE button on the Remote Control so that the “MONO” indicator goes off. Selecting other station will also cancel the FM Mono mode and re- store the stereo effect.

10

Page 70 Page 72
Image 71
Page 70 Page 72
Contents Consists of CA-MXKC4 and SP-MXKC4 MX-KC4Important for Laser Products How This Manual Is Organized FeaturesIntroduction Table of Contents Getting Started AccessoriesHow To Put Batteries In the Remote Control Using the Remote ControlUsing an FM 75-Ohm Antenna Cable not Supplied Connecting the FM AntennaUsing the Supplied Wire Antenna Rear Panel of the Unit Connecting the AM AntennaConnecting the Speakers Compu Play Connecting External EquipmentConnecting to the Wall Outlet Demo ModeBasic Operations Turning the Power On and OffAdjusting the Volume Fade-out Muting Fade Muting Enjoying the Powerful Sound Rhythm AXSelecting the Sound Mode Entering the Number with the Remote Control Numeric KeysOne Touch Radio Using the TunerTuning In a Station Select a station using one of the following methodsTo change the preset stations, repeat the same steps as Presetting StationsTo Change the FM Reception Mode Using the UnitMore about MP3 discs Using the CD PlayerWhen playing a CD-R or CD-RW For MP3 discsTo Unload CDs Changing the MP3 Playback ModeTo Load CDs To Select a Track Basics of Using the CD Player- Normal PlayTo Select a Group For MP3 Group mode only To Play CDsTo Exit and Re-enter Program Play Programming the Playing Order of the TracksTo Make a Program To Play the Program You Have MadeLocking the Tray Random PlayTray Lock Function Repeating TracksClose the cassette holder gently Using the Cassette Deck Listening to a TapePlaying a Tape To Fast-Wind a TapeThings To Know Before You Start Recording Using the Cassette Deck RecordingTo Record Any Sound Source to Tape Standard RecordingCD Synchro Recording Tape to Tape Recording DUB- BingListening to the External Equipment Using an External EquipmentFollow steps 2 to 5 of Setting the Clock men- tioned above Using the TimersSetting the Clock Press the CLOCK/TIMER buttonSelecting the music source Setting the Daily TimerSetting the OFF time Example Setting the on time ExamplePress the SET button on the Unit Setting the REC Recording TimerTurning the Daily Timer On and Off Setting the volume levelSelect the preset station for recording Turning the REC Recording Timer On and OffSetting the on time you want the System to turn on Setting the OFF time you want the System to turn offWait for 5 seconds Setting the Sleep TimerTimer Priority During playback a source, press the Sleep buttonCare And Maintenance Specification TroubleshootingMX-KC4 Compact Component System Instructions Important for Laser Products Precaucion English Table of Contents Set the Voltage Selector Switch Using the Remote Control Connecting the AM Antenna Connecting External Equipment Basic Operations Sound Mode Setting the AM Tuner Interval Spacing Press the 22or Ábutton to tune in a sta Select a station using one of the followingButton to select the preset number MethodsUsing the CD Player To Load CDs Basics of Using the CD Player Normal Play Programming the Playing Order of the Tracks Random Play 0PUSH Open Deck B 0PUSH Open Deck a Control to eliminate the beats AUX Using the Timers Setting the Daily Timer Setting the REC Recording Timer Turning the REC Recording Timer On and Off Setting the Sleep Timer Care And Maintenance Amplifier EN, SP, PR Importante para a ligação à tensão da rede CALVT1343-003B UJ Important for Laser Products Introduction Table of Contents Getting Started Getting Started Using the Remote Control Connecting the AM Antenna Connecting External Equipment Basic Operations Sound Mode Using the Tuner Presetting Stations Using the CD Player To Load CDs Basics of Using the CD Player- Normal Play Programming the Playing Order of the Tracks Random Play Using the Cassette Deck Listening to a Tape STANDBY/ON Sleep AUX FM Mode FM /AM Standard Recording Using an External Equipment Using the Timers Setting the Daily Timer Setting the REC Recording Timer Turning the REC Recording Timer On and Off Daily Timer 2130 2200 2230 Operation Care And Maintenance AC 110 V/127 V/220 V/230 V 240 MX-KC4 Compact Component System

0205NYMCREBET, LVT1343-006A, SP-MXKC4 specifications

The JVC SP-MXKC4 is a compact yet powerful audio system from JVC that brings a blend of style, versatility, and superior sound quality to any environment. This system is part of JVC's innovative product line that focuses on delivering impressive audio while maintaining an elegant design.

One of the main features of the JVC SP-MXKC4 is its robust stereo sound output, capable of delivering clear and dynamic audio across various genres. With its built-in amplifier, users can enjoy enhanced sound quality without the need for external components. The system is designed with a range of connectivity options, including USB, AUX, and Bluetooth, allowing users to stream music effortlessly from their smartphones, tablets, or laptops.

The LVT1343-006A component, which is part of the overall system, plays a crucial role in the operational functionality of the JVC SP-MXKC4. This specific part is designed to ensure high reliability and performance, providing the foundation for the audio system's capabilities. Notably, the component aids in efficient power management and system stability, making it an integral part of the overall user experience.

The 0205NYMCREBET feature of the JVC SP-MXKC4 is another standout aspect of the system, emphasizing its commitment to advanced technology and user-friendly operation. This feature allows for seamless integration with various digital formats, making it easy for users to enjoy their favorite music or audio content without any hassle. The system supports multiple audio formats, ensuring versatility in playback options.

In terms of design, the JVC SP-MXKC4 presents a sleek, modern aesthetic that can complement any home or office setting. Its compact size makes it an ideal choice for those with limited space, while still being powerful enough to fill larger rooms with high-fidelity sound.

With its blend of advanced features, reliability, and stylish design, the JVC SP-MXKC4 is an excellent choice for anyone looking to enhance their audio experience without compromising on quality or space. It stands as a testament to JVC's commitment to innovation in the home audio sector, delivering a product that meets the needs of modern consumers. Whether for personal enjoyment or entertaining guests, this audio system is designed to impress.
Top Page Image Contents