JVC LVT1266-001A manual Maintenance, Cleaning the unit, Handling discs, Handling cassette tapes

Page 33

Maintenance

To get the best performance of the unit, keep your discs, tapes and mechanism clean.

General Notes

In general, you will have the best performance by keeping your discs, tapes and the mechanism clean.

•Store discs and tapes in their cases, and keep them in cabinets or on shelves.

Cleaning the unit

•Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

•Since the unit may deteriorate in quality, become damaged or have its paint peel off, be careful about the following:

–DO NOT wipe it with a rough cloth.

–DO NOT wipe it too vigorously.

–DO NOT wipe it with thinner or benzine.

–DO NOT apply any volatile substance such as an insecticide to it.

–DO NOT allow any rubber or plastic to remain in contact with it for a long time.

Handling discs

•Remove the disc from its case by holding it at the edge while pressing

the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

•Put the disc back in its case after use

to prevent warping.

• Be careful not to scratch the surface of the disc when placing it back in its case.

• Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent—such as conventional record cleaner, spray, thinner, or benzine—to clean

the disc.

Handling cassette tapes

•If the tape is loose in its cassette, take up the

slack by inserting a pencil in one of the reels and rotating.

•If the tape is loose, it may get stretched, cut, or caught in the cassette.

•Be careful not to touch the tape surface.

•Avoid storing tapes in any of the following places:

– In dusty places

– In direct sunlight or heat

–In moist areas

–On a TV or speaker

–Near a magnet

To keep the best recording and playback sound quality

You need to clean the heads.

•Clean the heads after every 10 hours of use with

a wet-type head cleaning tape (available at electronic and audio shops).

When the head becomes dirty, the following symptoms will occur:

–Sound quality is reduced.

–Sound level decreases.

–Sound drops out.

•Do not play dirty or dusty tapes.

•Do not touch the highly-polished head with any metallic or magnetic tools.

Capstan

Head

Pinch Roller

To demagnetize the head

Turn off the unit, and use a head demagnetizer (available at electronic and audio shops).

30

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Micro Component System Important for Laser Products Above ALL Precautions IntroductionAbout This Manual Contents Main Unit Location of the Buttons and ControlsTop view Front viewRND. random indicator u A.STANDBY indicator Repeat indicatorsMain unit Display window+10 Remote ControlTo adjust the DAB antenna Connecting DAB AntennaGetting Started UnpackingConnecting Speakers Connecting AM MW and FM AntennasYou can connect the speakers using the speaker cords Release your finger from the clampPutting the Batteries into the Remote Control Connecting Other EquipmentTo remove the speaker grilles To connect an audio equipmentCommon Operations Setting the ClockAdjusting the Volume Turning On the PowerTurning Off the Unit Automatically Auto Standby Selecting the SourceReinforcing the Bass Sound Fade-Out Muting Fade MutingSelecting the Sound Modes Checking the Clock Time During PlayPlaying Back the Entire Disc-Normal Play Playing Back DiscsPress Open on top of the unit Place a disc correctly with its label side upBasic Disc Operations To go to another track directly using the number buttonsTo locate a particular point in a track To stop playing for a momentPress ¢ or 4 to select Programming the Track Playing Order Program PlayTrack number, then press PressRepeating Tracks-Repeat Play On the remote control only Press RepeatDisplaying the Remaining Time during Playback for Audio CD Playing at Random-Random PlayPlaying Back a Tape Playing Back TapesWhat is DAB? Listening to DAB BroadcastInitial Scanning Tuning in to a Preset Station Tuning in to a StationPresetting Stations Arranging and Sorting the Station List To select Service OrderChanging the Dynamic Range Control level DRC To select a desired optionRefreshing the Station List Changing the Display InformationOr SEARCH/SCROLL Down To select a desired compression LevelPreset Group to select a Press Preset Group orPreset number, then press Listening to FM and AM MW BroadcastsRadio Text Preset Group repeatedly To select a preset numberProgram Type RDS TimeSearching for Programs by PTY Codes PTY Search Changing the RDS InformationSet the volume level to the minimum position Press AUX Using an External EquipmentListening to the External Equipment AUX appears on the displayRecording To record on both sides-Reverse ModeRecording on a Tape Is lit on the displayPlayer as the source Press 7 to stop the disc Recording Discs Disc Synchronized RecordingPlayback Repeatedly until Is lit on DisplayUsing Daily Timer and Recording Timer Using the TimersPress Volume +/- to adjust the volume for the on-time Using Snooze TimerPress UP or Down to select the source to play Press SETOn the remote control only Press Sleep Using Sleep TimerHow the Sleep Timer actually works Indicator flashes slowly on the displayCleaning the unit MaintenanceHandling discs Handling cassette tapesSymptom TroubleshootingPower does not come on No sound is heard Possible Cause ActionSpecifications UX-HB4 Micro Component System

LVT1266-001A specifications

The JVC LVT1266-001A is an advanced speaker model that epitomizes the commitment of JVC to delivering high-quality audio experiences. Known for its versatility and impressive sound performance, the LVT1266-001A is ideal for various multimedia applications, such as home theater systems, music playback, and gaming setups.

One of the standout features of the JVC LVT1266-001A is its powerful audio output. Equipped with a robust woofer and a dedicated tweeter, the speaker is designed to reproduce a wide range of frequencies with clarity and richness. This dual-driver configuration allows for deep bass response while maintaining crisp highs, making it suitable for all types of music genres and movie soundtracks.

The LVT1266-001A incorporates advanced audio technologies to enhance the listening experience. One such feature is JVC's proprietary sound optimization technology, which automatically adjusts the speaker output to match the acoustics of the room. This ensures that regardless of where you place the speaker, you’ll enjoy a balanced and immersive soundstage.

Additionally, the speaker supports a variety of input formats, making it highly adaptable. It typically includes traditional wired connections as well as compatibility with modern wireless protocols such as Bluetooth. This allows users to easily connect their devices and enjoy their favorite playlists or movies without the hassle of tangled cables.

Another notable characteristic of the JVC LVT1266-001A is its stylish and compact design. With sleek lines and a modern aesthetic, the speaker seamlessly integrates into any home or office décor. It is also lightweight and portable, allowing for relocation without difficulty, which is perfect for users who wish to take their audio experience on the go.

In terms of durability, the LVT1266-001A is built to last. The materials used in its construction provide strong resistance against wear and tear, ensuring longevity while delivering consistent sound performance. The speaker also features user-friendly controls, allowing for easy adjustments without needing complex setups or extensive user manuals.

In conclusion, the JVC LVT1266-001A is a feature-rich speaker that stands out for its audio quality, versatility, and stylish design. It is an excellent choice for anyone looking to elevate their audio experience, whether for casual listening or critical listening environments. With its blend of advanced technologies and practical features, the LVT1266-001A continues to be a popular option for audio enthusiasts.
Top Page Image Contents