JVC LVT1266-001A manual Troubleshooting, Symptom, Possible Cause Action

Page 34

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer for service.

Symptom

Power does not come on.

No sound is heard.

 

Possible Cause

 

 

Action

The power cord is not connected to an

Insert the plug into the socket.

AC outlet.

 

 

 

 

 

 

 

 

•

Connections are incorrect or loose.

•

Check all connections and make

 

 

 

 

corrections. (See pages 6 to 8.)

•

A pair of headphones is connected.

•

Unplug the headphones from the

 

 

 

 

PHONES jack.

•

MP3 disc is recorded with “packet

•

It cannot be played. Replace the disc.

 

writing.”

 

 

 

 

 

 

 

 

Hard to listen to broadcasts because of noise.

•Antennas are disconnected.

•For AM (MW):

The AM (MW) loop antenna is too close to the unit.

•For DAB and FM:

The antenna is not properly extended and positioned.

•Reconnect the antenna correctly and securely.

•Change the position and direction of the AM (MW) loop antenna.

•Extend antenna and orient to the best reception position.

The disc does not play.

Impossible to record.

Operations are disabled.

Unable to operate the unit by the remote control.

The disc is upside down.

Put the disc in with the label side up.

 

 

 

Small tabs on the back of the cassette are

Cover the holes with adhesive tape.

removed.

 

 

 

 

 

 

The built-in microprocessor has

Unplug the AC power cord then plug it

malfunctioned due to external electrical

back in.

interference.

 

 

 

 

 

 

 

 

•

The path between the remote control

•

Remove the obstruction.

 

and the remote sensor on the unit is

 

 

 

 

blocked.

 

 

 

•

The batteries are exhausted.

•

Replace the batteries. (See page 8.)

•

You are using the remote control too

•

Signals cannot reach the remote

 

far from the unit.

 

 

sensor. Move closer to the unit.

 

 

 

 

 

31

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Micro Component System Important for Laser Products Above ALL Introduction PrecautionsAbout This Manual Contents Top view Location of the Buttons and ControlsMain Unit Front viewMain unit Repeat indicatorsRND. random indicator u A.STANDBY indicator Display windowRemote Control +10Getting Started Connecting DAB AntennaTo adjust the DAB antenna UnpackingYou can connect the speakers using the speaker cords Connecting AM MW and FM AntennasConnecting Speakers Release your finger from the clampTo remove the speaker grilles Connecting Other EquipmentPutting the Batteries into the Remote Control To connect an audio equipmentSetting the Clock Common OperationsTurning Off the Unit Automatically Auto Standby Turning On the PowerAdjusting the Volume Selecting the SourceSelecting the Sound Modes Fade-Out Muting Fade MutingReinforcing the Bass Sound Checking the Clock Time During PlayPress Open on top of the unit Playing Back DiscsPlaying Back the Entire Disc-Normal Play Place a disc correctly with its label side upTo locate a particular point in a track To go to another track directly using the number buttonsBasic Disc Operations To stop playing for a momentTrack number, then press Programming the Track Playing Order Program PlayPress ¢ or 4 to select PressDisplaying the Remaining Time during Playback for Audio CD On the remote control only Press RepeatRepeating Tracks-Repeat Play Playing at Random-Random PlayPlaying Back Tapes Playing Back a TapeListening to DAB Broadcast What is DAB?Initial Scanning Tuning in to a Station Tuning in to a Preset StationPresetting Stations Changing the Dynamic Range Control level DRC To select Service OrderArranging and Sorting the Station List To select a desired optionOr SEARCH/SCROLL Down To select a desired compression Changing the Display InformationRefreshing the Station List LevelPreset number, then press Press Preset Group orPreset Group to select a Listening to FM and AM MW BroadcastsProgram Type Preset Group repeatedly To select a preset numberRadio Text RDS TimeChanging the RDS Information Searching for Programs by PTY Codes PTY SearchListening to the External Equipment Using an External EquipmentSet the volume level to the minimum position Press AUX AUX appears on the displayRecording on a Tape To record on both sides-Reverse ModeRecording Is lit on the displayPlayback Recording Discs Disc Synchronized RecordingPlayer as the source Press 7 to stop the disc Repeatedly until Is lit on DisplayUsing the Timers Using Daily Timer and Recording TimerPress UP or Down to select the source to play Using Snooze TimerPress Volume +/- to adjust the volume for the on-time Press SETHow the Sleep Timer actually works Using Sleep TimerOn the remote control only Press Sleep Indicator flashes slowly on the displayHandling discs MaintenanceCleaning the unit Handling cassette tapesPower does not come on No sound is heard TroubleshootingSymptom Possible Cause ActionSpecifications UX-HB4 Micro Component System

LVT1266-001A specifications

The JVC LVT1266-001A is an advanced speaker model that epitomizes the commitment of JVC to delivering high-quality audio experiences. Known for its versatility and impressive sound performance, the LVT1266-001A is ideal for various multimedia applications, such as home theater systems, music playback, and gaming setups.

One of the standout features of the JVC LVT1266-001A is its powerful audio output. Equipped with a robust woofer and a dedicated tweeter, the speaker is designed to reproduce a wide range of frequencies with clarity and richness. This dual-driver configuration allows for deep bass response while maintaining crisp highs, making it suitable for all types of music genres and movie soundtracks.

The LVT1266-001A incorporates advanced audio technologies to enhance the listening experience. One such feature is JVC's proprietary sound optimization technology, which automatically adjusts the speaker output to match the acoustics of the room. This ensures that regardless of where you place the speaker, you’ll enjoy a balanced and immersive soundstage.

Additionally, the speaker supports a variety of input formats, making it highly adaptable. It typically includes traditional wired connections as well as compatibility with modern wireless protocols such as Bluetooth. This allows users to easily connect their devices and enjoy their favorite playlists or movies without the hassle of tangled cables.

Another notable characteristic of the JVC LVT1266-001A is its stylish and compact design. With sleek lines and a modern aesthetic, the speaker seamlessly integrates into any home or office décor. It is also lightweight and portable, allowing for relocation without difficulty, which is perfect for users who wish to take their audio experience on the go.

In terms of durability, the LVT1266-001A is built to last. The materials used in its construction provide strong resistance against wear and tear, ensuring longevity while delivering consistent sound performance. The speaker also features user-friendly controls, allowing for easy adjustments without needing complex setups or extensive user manuals.

In conclusion, the JVC LVT1266-001A is a feature-rich speaker that stands out for its audio quality, versatility, and stylish design. It is an excellent choice for anyone looking to elevate their audio experience, whether for casual listening or critical listening environments. With its blend of advanced technologies and practical features, the LVT1266-001A continues to be a popular option for audio enthusiasts.
Top Page Image Contents