STORAGE AND TROUBLE-SHOOTING
Inspect and tighten all parts of the AEROFLYER regularly. Replace any worn parts immediately.
The AEROFLYER can be cleaned with a soft, damp cloth. Keep liquids away from the electronic monitor. Keep the monitor out of direct sunlight or the display may be damaged. Remove the batteries when storing the AEROFLYER.
REPLACING THE BATTERIES
If the display of the electronic monitor becomes dim, or if the monitor does not function properly, the batter- ies should be replaced. To replace the batteries, first lift the monitor from the crossbar cover (see assembly step 4 on page 5). Make sure that the reed switch wire is fully connected to the wire on the monitor. To replace the batteries, refer to assembly step 3 on page 4.
HOW TO FOLD THE AEROFLYER FOR STORAGE
When the AEROFLYER is not in use, it can be folded to the storage position. To fold the AEROFLYER, first remove the lock knob from the left leg. Next, move to the front of the AEROFLYER and place one foot on the round tube. Firmly grasp the frame with your hands in the locations shown below. While holding the round tube stationary with your foot, tip the top of the AEROFLYER toward yourself, until the uprights fold against the frame as shown. Place the AEROFLYER in a location where it cannot fall.
| Place |
Lock | Hands |
Here | |
Knob |
|
Back | Front |
| |
| Frame |
Upright | Round |
| Tube |
8